|
|
Phones
07 570 3339
0274 919 460
Address
61 Freyberg Street
Tauranga, 3110
NEW ZEALAND
e-mail
dunnrite@actrix.co.nz
|
|
Having
trouble pulling your skier up?
We supply purpose built
propellers for water skiing & wake boarding |
Water Skiing & Wake Boarding Propellers
We supply and repair propellers for Water
Skiing and Wake Boarding.
If the boat has an Outboard or Sterndrive CLICK
HERE.
For inboard powered ski boats with fixed prop
shafts there are numerous options when it comes to supplying
propellers. Most of today's inboard ski boat propellers are cast
in NiBrAl (Nickel, Bronze, Aluminum). We recommend the Ambush4.
Smooth Power -
Times Four
from
$750 to $825 incl.
GST |
 |
|
|
 |
|
|
|
|
The Ambush4 is a new, highly polished
precision balanced 4 blade Nibral propeller designed specifically
for the ski and wakeboard enthusiast.
With an advanced manufacturing process, Michigan Wheel is able
to produce a very consistent cup and blade geometry which results
in a very smooth performing propeller. Because of this new and
improved process and leading edge geometry, Ambush4 will provide
extra strength, less flex, durability and consistent performance
and efficiency.
There is an Ambush4 propeller available for most ski and wakeboard
boats. Prices start at $795-00.
Application Guide |
Always verify shaft size
& gear ratio. Engine size and added weight can also affect
propeller selection.
This guide is intended for reference purposes only. There are
several factors that go into determining the correct size propeller
for each boat & application. If you have any questions or
concerns in choosing the correct propeller, please contact us. |
|
Manufacturer |
Application |
Gear
Ratio |
Ambush4 Propeller Sizes |
Part No. |
|
Brendella |
Prior to 1992 |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Brendella |
After 1992 |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
Centurian |
Eclipse / Elite |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
Correct Craft |
Ski Nautique |
1.23 : 1 |
13 x 16 x 1" RH |
AMB635300 |
|
Correct Craft |
Ski Nautique V-Drive |
1.5 : 1 |
13 x 16 x 1-1/8" RH |
AMB635302 |
|
Correct Craft |
Ski Nautique V-Drive |
1.46 : 1 |
14 x 18 x 1-1/8" RH |
AMB635402 |
|
Malibu |
Prior to 1992 |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Malibu |
After 1992 |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
Malibu |
V-Drive |
1.46 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
Malibu |
V-Drive |
1.46 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
Malibu |
8.1 litre |
1.5 : 1 |
14 x 20 x 1-1/8" LH |
AMB635443 |
|
Mastercraft |
ProStar |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Mastercraft |
MariStar / ProStar |
1.5 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
Mastercraft |
MariStar / ProStar |
1.5 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
Mastercraft |
1998 TBI Eng. |
1.5 : 1 |
14 x 20 x 1-1/8" LH |
AMB635443 |
|
MB Sports |
190, B-52, 220 |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
MB Sports |
B-52 V-Drive, 220V |
1.5 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
MB Sports |
B-52 V-Drive, 220V |
1.5 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
Moomba |
Kanga, Outback, Mobius Pro |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Moomba |
Kamberra, Mobius V |
1.5 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
Moomba |
Kamberra, Mobius V |
1.5 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
Sanger |
Prior to 1992 |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Sanger |
After 1992 |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
Supra |
Comp, Launch, Legacy, Sunsport |
1 : 1 |
13 x 13 x 1" LH |
AMB635101 |
|
Supra |
N/A |
1.23 : 1 |
13 x 16 x 1" RH |
AMB635300 |
|
Supra |
Santera, Sunsport V |
1.5 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
Supra |
Santera, Sunsport V |
1.5 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
Tige |
201, 2100 Riders |
1 : 1 |
13 x 13 x 1-1/8" LH |
AMB635103 |
|
Tige |
2100 V LTD, 21 V Riders, 2300 V LTD |
1.5 : 1 |
13-1/2 x 17-1/2 x 1-1/8" LH |
AMB635343 |
|
Tige |
2100 V LTD, 21 V Riders, 2300 V LTD |
1.5 : 1 |
14 x 18 x 1-1/8" LH |
AMB635403 |
|
There are some
other sizes - There is sure to be an Ambush4 to fit your boat |
If the Ambush4 is not for you, we can supply
other brands in both 3 or 4 blades from prop manufacturers including
Austral, Michigan Wheel and OJ.  for further information.
If your propeller shaft bearing is worn out, we can supply a
new bush for that too.
Outboard or Sterndrive
If you are water skiing or wake boarding with an outboard or
sterndrive we have a great selection of lower pitched aluminium
and stainless steel propellers in stock to improve that hole
shot.
If you are looking for a particular Outboard
or Sterndrive propeller or for propeller prices go to  or for further information.
|
Prices are quoted in NZ Dollars
and may change without notification. |
Copyright © 1996 - 2010
Dunnrite Propeller Services Ltd
All rights reserved
|
